1.125 Diameter Shaft

Searching results for 1.125 Diameter Shaft: compare prices & shop TOP deals

Customers who bought 1.125 Diameter Shaft were also interested in Luxury Hotel Linen, Black Hills Gold Claddagh Ring, and Hands Free Soap Dispenser

Crescent External Retaining Ring, Tapered Section, Radial Assembly, SAE 1060-1090 Carbon Steel, Phosphate Finish, 1-1/8
Crescent External Retaining Ring, Tapered Section, Radial Assembly, SAE 1060-1090 Carbon Steel, Phosphate Finish, 1-1/8" Shaft Diameter, 0.050" Thick, Made in US (Pack of 25)

Retaining rings attach to a shaft (external) or install in a bore (internal), creating a shoulder to maintain component positioning within an assembly. While most rings install into a machined groove either on the inside or outside diameter of a shaft, self-locking rings attach to a shaft by using friction from means such as teeth and notches to maintain placement. Retaining rings should fit tightly enough into the groove or onto the shaft so they won't experience any movement.

  • Brand: Small Parts
  • ASIN: B0062O6SSQ
  • Part No: C-112ST PA
Chrome Plated 1045 Carbon Steel Shaft, 1.125
Chrome Plated 1045 Carbon Steel Shaft, 1.125" (1-1/8") Diameter x 18" Long, 1 pc.

Chrome plated shafts are more corrosion resistant than black-oxide shafts and stronger than stainless steel. Often used with gears, sprockets, rotary bearings and other power transmission components.

  • Brand: K-mac
  • ASIN: B07PVC3Z93
  • UPC: 694536490253
  • Part No: Shaft-1226
Kutzall Grit Ball Nose Burr, 1/4
Kutzall Grit Ball Nose Burr, 1/4" Shaft (6.3mm) - Coarse, (23 Grit), Tungsten Carbide Coating: 3/4" (19mm) Head Diameter x 1-1/8" (28.5mm) Head Length - BNG-34

Kutzall tools are fast-cutting and long lasting, designed to work easily and efficiently where other conventional tools fail. Their tungsten carbide coatings consist of hundreds of extremely sharp teeth that rapidly remove stock and last 7 to 10 times longer than high-speed steel tools. They are not prone to loading but may easily be cleaned with solvent or burned clean with a gas torch. Whether you are a casual hobbyist or professional craftsman, Kutzall's durable carbide coatings will last job after job. All Burrs are used for various carving, hobby, industrial or do-it-yourself applications in flex-shaft tools or popular hand-held grinders with collets or adjustable chucks. When it's your special hobby, do-it-yourself project or industrial application, Kutzall will provide you with the effortless control and superior performance you demand. With over 60 years of experience, Kutzall has long been the leader in the industry. Kutzall Grit tools use a very rugged coating comprised of hard, randomly shaped, sharp edged grits. This grit coating is impact-resistant with excellent wear life in the most punishing applications. They work great for rough service and hand routing including trimming soft stone, ceramics, fiberglass, and other laminates. Recommended operating speed range is...

  • Brand: Kutzall
  • ASIN: B00HESOX4K
  • UPC: 818050020516
  • Part No: BNG-34
Standard External Retaining Ring, Spiral, Axial Assembly, 1070-1090 Carbon Steel, Plain Finish, 1-1/8
Standard External Retaining Ring, Spiral, Axial Assembly, 1070-1090 Carbon Steel, Plain Finish, 1-1/8" Shaft Diameter, 0.05" Thick, Made in US (Pack of 5)

The standard external retaining ring has a spiral construction, assembles axially, is made of plain finished 1070-1090 carbon steel, and is made in USA. The ring has a flexible spiral construction that enables installation by hand and provides more clearance than taper sectioned rings with lug holes. The entire coil makes contact with the shaft diameter when installed. The ring installs by sliding onto a shaft from the end, also called axial assembly. Axially installed rings reach further around the outside diameter of the shaft than radially installed rings. The 1070-1090 carbon steel is often used in applications where strength is the primary consideration.Retaining rings attach to a shaft (external) or install in a bore (internal), creating a shoulder to maintain component positioning within an assembly. While most rings install into a machined groove either on the inside or outside diameter of a shaft, self-locking rings attach to a shaft by using friction from means such as teeth and notches to maintain placement. Retaining rings should fit tightly enough into the groove or onto the shaft so they won't experience any movement.

  • Brand: Small Parts
  • ASIN: B006T5KP14
  • Part No: WSM-112
SKF 99116 Speedi Sleeve, SSLEEVE Style, Inch, 1.125in Shaft Diameter, 0.375in Width -

  • Brand: SKF
  • ASIN: B00460DH5U
  • UPC: 085311158978
  • Part No: 99116
SUPER HEAVY DUTY LEESON ELECTRIC 5HP 184T COMPRESSOR DUTY MOTOR, 1725 RPM, 230VAC, 1 1/8
SUPER HEAVY DUTY LEESON ELECTRIC 5HP 184T COMPRESSOR DUTY MOTOR, 1725 RPM, 230VAC, 1 1/8" SHAFT DIAMETER, REVERSIBLE ROTATION,

This General Purpose Motor can be used on a wide variety of single phase applications. 5HP Single Phase ODP (open drip proof) F.L. amps at 230 Volts 21.0 1 1/8" shaft diameter 1725 Rpm weighs 83 lbs

  • Color: GRAY GLOSS
  • Brand: Leeson
  • ASIN: B06Y4CTZTH
  • UPC: 713807486563
  • Part No: 132630 REPLACES 131537
Standard External Retaining Ring, Tapered Section, Axial Assembly, 1060-1090 Carbon Steel, Zinc Yellow Chromate Plated Finish, 1-1/8 Shaft Diameter, 0.05
Standard External Retaining Ring, Tapered Section, Axial Assembly, 1060-1090 Carbon Steel, Zinc Yellow Chromate Plated Finish, 1-1/8 Shaft Diameter, 0.05" Thick, Made in US (Pack of 25)

The standard external retaining ring has a tapered section, assembles axially, is made of zinc yellow chromate plated 1060-1090 carbon steel, and is made in USA. The ring has a standard round shape with a lug hole on each end for installing onto the shaft with a tool. The ends pry apart with the installation tool and snap back towards each other when installed on the shaft for a tight grip. The tapered section style provides the ring with flexibility to facilitate installation and typically withstands higher thrust loads than constant section and spiral rings. The ring installs by sliding onto a shaft from the end, also called axial assembly. Axially installed rings reach further around the outside diameter of the shaft than radially installed rings. The 1060-1090 carbon steel is often used in applications where strength is the primary consideration, and the zinc yellow chromate plating offers good corrosion resistance.Retaining rings attach to a shaft (external) or install in a bore (internal), creating a shoulder to maintain component positioning within an assembly. While most rings install into a machined groove either on the inside or outside diameter of a shaft, self-locking rings attach to a shaft by using friction from means such as teeth and notches to maintain placement....

  • Brand: Small Parts
  • ASIN: B0062OGY80
  • Part No: SH-112ST ZD

Turning a Diameter to Size on the Lathe

1.125 Diameter Shaft

Another in the basic lathe operation video series, this one covers turning to a diameter. I talk about tool set-up, roughing and finishing cuts and how to zero the dial for an accurate diameter.

Tags: machining,machinist,processes,techniques,how to...